Product Overview
Kehua's Eon-Li 10-30KVA series UPS are reliable, flexible power solutions focused on delivering the lowest total cost of ownership and highest performance. The UPS has a built-in lithium battery and a modular hot-swappable design, which can provide 30KW power backup for about 14 minutes. Compared with ordinary VRLA batteries, it has a longer service life, thereby reducing battery maintenance costs.
Excellent technical indicators making it more energy-saving and environmentally friendly. Intelligent management bringing users a better human-computer interaction experience.
Therefore, the Eon-Li series can basically be applied to various information applications, such as telecommunications, edge computing, finance, servers, LAN, security and medical equipment, etc.
Excellent technical indicators making it more energy-saving and environmentally friendly. Intelligent management bringing users a better human-computer interaction experience.
Therefore, the Eon-Li series can basically be applied to various information applications, such as telecommunications, edge computing, finance, servers, LAN, security and medical equipment, etc.
Key Features
High Reliability
High Reliability
Wide input voltage range 120-268V (L-L) and wide input frequency range 40-70Hz with high grid adaptability and prolong battery life.
The most advanced and dual DSP control prevents single failure point and increase performance.
High overload capacity on inverter for 105% load long run and 130% load 10 mins and bypass 130% load long run.
Electrical and physical double isolation design, reduce the fault scope to an effective space without diffusion.
Lightning and surge protection design which help UPS to sustain from high surge peak voltage.
Battery reverse connection protection to make sure the system reliability.
Standard conformal coating to all PCB boards, protect electronics from environmental affection such as dust, salt spray and corrosion.
Cold start function which allow UPS start on battery when grid isn't available.
Dual input design which supports utility input and bypass input can be connected as single source or separated source.
Bulid-in Lithium-ion Battery
Bulid-in Lithium-ion Battery
Flexibility Design
Flexibility Design
Build-in Hot-swappable battery module, make sure high density and easy for maintenance.
2 Slots for communication, available for multiple way of communication.
Optimize installation and easy service architecture design minimizes the MTTR and optimizes serviceability and comes equipped with wheel which is easy for movement and relocation.
Parallel slot design which allow up to 4 units parallel at site for capacity or N+X redundancy.
Green Power
Green Power
Latest generation IGBT and three level technology, Low harmonic, high efficiency, effectively energy-saving.
High power density design, which small footprint on 30KVA only 0.38m² for saving installation space.
High input power factor up to 0.99 and low Input THDi: < 3.0% at full load, much less grid pollution and costs.
AC/AC efficiency up to 94% to reduce heat dissipation and to limit power consumption costs.
ECO mode efficiency up to 98.5% lead to significant cost reduction.
Self-load test function, easy debugging and easy onsite test during commissioning, before it is connected the real load, without using costly temporary loads, cabling and breakers for energy saving.
Intelligent Management
Intelligent Management
Multiple method of communication which provide RS485, dry contact, SNMP together with Modbus protocol to compatible with most management system.
Smart programmable dry contact which have 1 input dry contact and 5 output dry contact, which input dry contact have more than 6 functions and output dry contact have 13 functions allows to settable at site.
Intelligent battery charging with 3 stage methods for VRLA battery to prolong the service life of batteries.
Battery Static delay function provide better battery care, to prevent overcharging when battery is full. Battery have slow self-discharge even if the battery does not discharge to the load, the battery voltage will slowly decrease. UPS could set duration for days to recharge the battery as full level to make sure maximum life time.
VRLA and Lithium battery compatible design.
User-friendly Interface
User-friendly Interface
Colorful 4.3 inches touch screen with LED Indicators, ensure comprehensive and visualized information display.
User-friendly double physical ON/OFF button design to avoid false operation.
User-friendly graphical interface with single-line mimic diagram showing system status.
High security access with separate password levels for users, technician and service engineers.
Large data storage capacity,10000pcs events logs.
Easy update for display firmware.
Technical Specification
- Eon10Li/
- Eon20Li/
- Eon30Li
Input Voltage (Vac)
L-L:120~268 (156-268 at full load)
AC/AC Efficiency (Max.)
94%
Output Voltage (Vac)
190/200/208/220±1%(L-L)±1%(default is 208V)
Dlmenslon (W×D×H) (mm)
378×993×1250mm (14.9×39.1×49.2in)
Package Dlmenslon (W×D×H)
456×1110×1390mm (18×43.8×55in)
Weight(kg) (Without battery)
94kg (207lb)
Weight (kg)*
135kg (298lb)
Input Voltage (Vac)
L-L:120~268 (156-268 at full load)
AC/AC Efficiency (Max.)
94%
Output Voltage (Vac)
190/200/208/220±1% (L-L)±1% (default is 208V)
Dlmenslon (W×D×H) (mm)
378×993×1250mm (14.9×39.1×49.2in)
Package Dlmenslon (W×D×H)
456×1110×1390mm (18×43.8×55in)
Weight (kg) (Without battery)
103kg (227lb)
Weight (kg)*
177kg (390lb)
Input Voltage (Vac)
L-L:120~268 (156-268 at full load)
AC/AC Efficiency (Max.)
94%
Output Voltage (Vac)
190/200/208/220±1% (L-L)±1%(default is 208V)
Dlmenslon (W×D×H) (mm)
378×993×1250mm (14.9×39.1×49.2in)
Package Dlmenslon (W×D×H)
456×1110×1390mm (18×43.8×55in)
Weight (kg) (Without battery)
110kg(2421b)
Weight (kg)*
220kg (485lb)
Product Inquiry
Whether you're chasing a quote or wanting to know more about us, we're here to listen.
NAME
EMAIL ADDRESS
COMPANY
COUNTRY
YOUR MESSAGE
Eon-Li Series
ZOOM
DRAG TO ROTATE