The Contact Monitor Module can be easily setup a complete facility alarm system that can be managed and monitored over the network.
Using its simple plug ́n play connections, simply install door, window, motion detectors, fire/ smoke alarms and other digital contact alarms where needed to the Contact Monitor Module.
The device incorporates 8 potential free contacts, and the status is displayed via 8 LEDs on the front of the device. Via the integrated RS485 and MODBUS-RTU serial interface, all information can be read and processed by other systems.
• Module status indication via LEDs; RUN and COMM.
• Multiple Baud Rates Support; 1200 ~ 19200bps.
• Internal Dual DatchDog
• Enhanced EMC protection abilities and ensures the module is more reliable.
• High Intra-module isolation: 3750Vrms.
• Din Rail Mount.
|Item||Contact Monitor Module|
|General||Input Voltage : 12Vdc (9 ~ 30Vdc)|
|Power Consumption: Less then 1W|
|Operating Temperature: -10’C ~ 50’C|
|Humidity: 10% ~ 90% RH, Non-condensing|
|EMC Protection||ESD: ± 6KV Contact for each terminal; ±8KV Air for random point|
|EFT: ±2KV for Power Line|
|Baud Rate: 1200 ~ 19200bps (default 9600bps)|
|Dual Watchdog: Yes|
|I/O Specification||Channel: 8|
|1Type: Active DC|
|Input Impedance: 3kΩ/0.5W|
|Input Logic Level; High: 0 ~ 1Vdc|
|Input Logic Level; Low: 4 ~ 30Vdc|